Aligning The Appliance; Fit The Door Handle Covers - Bosch KMF Serie Montage- Und Gebrauchsanleitung

Aligning the appliance

Place the appliance in the designated location
and align. The appliance must be level. If the floor is
uneven, use the front height-adjustable feet. Adjust
the height-adjustable feet with a wrench.
Note
The appliance must be upright. Please align it with
a spirit level.
Aligning the doors
The appliance has adjustable door jambs. These can
be used to align the doors.
1. Open both refrigerator compartment doors and the
uppermost drawer of the freezer compartment.
2. There is a screw under the lower hinge of each
refrigerator compartment door.
Use a cross-tip screwdriver to align the doors by
adjusting the screws.
3. The corresponding door is raised by 1.5 mm with
each clockwise turn of the screw.
The maximum adjustable height is 3 mm.
Note
To make it easier to turn the screws, the doors should
not have any load in them. Lifting the door also
facilitates its adjustment.

Fit the door handle covers

Fit the enclosed covers to the edges of the door
handles. This will prevent children from injuring
themselves on the edges.
en
67