Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance - eta Coolio mini Bedienungsanleitung

Mini-luftkühler
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 34
Please make sure that the supply cord of the adapter isn't damaged and that it doesn't go
under the appliance or through any sharp or heat surfaces. The electric socket must be
easily accessible so that the appliance can be easily disconnected from power supply if
danger appears. Connect the appliance to mains (the LED indicating lamp A3 will light up).
– To power the appliance, only use a source of safe low voltage of 5 V which
complies with applicable standards (mobile phone chargers with a micro USB
connector with double insulation are suitable) and is able to provide current
of at least 1.8 A or more.
– Do not use USB ports on other devices (e.g. computers, laptops, tablets, mobile
phones, etc.) to power the appliance. Such devices may not be dimensioned for
the current consumption of the appliance and it could damage them.
The principal of work of the appliance is based on capillary rise of water with help of textile
plates. Air, blown through the wetted textile plates, is thus cooled (depending on water
temperature), and therefore its relative humidity is increased.
IV. INSTRUCTIONS FOR USE
Flowing of cooled air may be directed by means of the frontal rotary grid A6.
ON/OFF button + blow speed setting button (A1)
1st press
- switches-on the appliance to the 1st speed stage;
2nd press
- switches-over the appliance to the 2nd speed stage;
3rd press
- switches-over the appliance to the 3rd speed stage;
4th press
- switches-off the appliance.
– Connection of power supply is indicated by the LED indicating lamp A3.
– The set speed is indicated by a corresponding LED indicating lamp A4.
LED decorative light (A2) setting button
1st press
- switches-on the colored gradually-changed lighting;
2nd press
- switches-over to the one-color lighting mode. By the next pressing, you
can set the required color, which will be permanently lighting, or you
can switch-off lighting.
Before setting the LED decorative light, first of all it is necessary to switch-on the
V. MAINTENANCE
Wipe separate parts of the outer cladding of the appliance and the surface of the adapter
and its supply cord with a wet fabric or a sponge. Prevent from intrusion of water into the
appliance. Do not use any aggressive or abrasive cleaning agents.
WARNING
Remark
Remarks
Remark
appliance.
19
/ 39
GB

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

1568

Inhaltsverzeichnis