Viewing Results On A Personal Computer - Fora IR21 Benutzerhandbuch

Viewing Results on a Personal
Computer
Results in memory can be transmitted to the personal computer
by either cable or wireless connection for FORA IR21c, FORA
IR21z and FORA IR21b, respectively. Accessories needed to
activate this function are:
Health Care Software System: a software downloaded from
ForaCare's website (www.foracare.ch).
Interface Cable: an optional accessory for FORA IR21c.
ZigBee Gateway: an optional accessory for FORA IR21z.
Bluetooth Adapter: an optional accessory for FORA IR21b.
Please contact your local customer service for above accessories.
Transmitting data via Cable (FORA IR21c)
Step 1 Install Software
Install Health Care System Software on your computer by
following the instructions provides on ForaCare's website.
Step 2 Connect to Personal Computer
Connect the interface cable to a serial port on the back of your
computer. With the thermometer turn off, connect the interface
cable to the data port located at the bottom of the thermometer.
Then " PCL " will appear in the display, indicating that the
thermometer is ready to transmit data.
22