Before Using Your Appliance For The First Time; Switching On The Appliance; Filling Up The Pipe System - Siemens TK 68-Serie Gebrauchsanleitung

Before using your appliance for the
first time
General
Switching on the
appliance
COFFEE
Filling up the pipe
system
FILL UP PRESS
PIPE-SYS CAFE
PIPE-SYS
FILLS UP
Selecting the language
Sprache
deutsch
Fill the respective containers with pure water and coffee
beans only.
Do not use coffee beans which have been glazed,
caramelised or treated with other additives containing sugar.
Ascertain the water hardness with the enclosed test strip.
If a hardness value other than 3 is indicated, switch on the
appliance and program accordingly (see page 36).
q Pull the power cord out of the cord store and connect.
q Fill water tank 23 with cold fresh water. Do not fill above
max." mark.
q Fill the bean container 16 with coffee beans.
q Set mains switch 1 to I.
q Set function selector 2 to
q Press button ) 4.
The appliance is ready for use when the illuminated
i
rings on button ) 4 and on the 2 button 5 are
lit green.
Note: If the appliance is being used for the first time or has
not been operated for a prolonged period, the first cup of
coffee will not have the full aroma and should not be drunk.
For production reasons when switched on for the first time,
the water pipe system in the appliance may occasionally have
to be refilled:
q Press the 2 button 5.
To change the display to the desired language:
q Hold down button
3 seconds.
%
q Press button
q Select the desired language with < or >.
%
q Press button
q Press the & button.
z
.
%
on the display 3 for at least
until the display flashes.
to save the language.
29