Settings - auna IR-260 Bedienungsanleitung

EN
40

SETTINGS

Analogue/digital
Time display
Once activated, My mediaU is displayed in the main
My mediaU
menu. If there are several mediaU accounts on the
radio, select the desired account to login.
Wireless network setting: Enable/disable wireless
Network
network. When you enable the wireless network, the
unit automatically selects the AP you need. A WEP or
WPA password is required to connect the device to the
wireless network.
Wireless network setting (WPS PBC): If you use a
router with a WPS button, you can easily connect to
the network using the WPS function. Open the WPS
function and press the WPS button on your router
within 120 seconds. The connection between the router
and your device is established automatically.
Manual setting: You can select DHPC (with automatic IP
selection) or enter the IP address manually to establish
the wireless connection. If you select manual setting,
the following entries must be made: SSID (name
of access point), IP address, subnet mask, default
gateway, preferred DNS server, alternate DNS server.
Network Check (Power On): Enables/disables the
wireless network. When you enable the wireless
network, the device automatically searches for
available AP. Select the required AP.
You can set both 12-hour format and 24-hour format.
Date and time
You can select from YYYY/MM/DD, DD/MM/YYYYY
and MM/DD/YYYYY.