Scale Protocol Transferring (Model With Rs-232) - Gram ZFOC Bedienungsanleitung

Note:
• User-defined 4~200 seconds at will, the backlight will be on all the time
if you set the time to 200 seconds (display F after setting).
• If the scale enters into the power saving status, the backlight will be off.
• If you want to improve backlight brightness (level 1-level7,level 7 is
brightest), please press
Scale protocol transferring
1. Power on your scale, then you can press
protocol transferring setting.
2. Press the
screen is to show signals BELOW.
You can enter any section you need by pressing
10
Downloaded from www.Manualslib.com
key for switchover, at that time the left side of display
CO,D0. Passive sending out.
C1,D1. Wagon balance scale active sending out.
C2,D2. FTP scale active sending out.
manuals search engine
key to change.
(model with RS-232)
key and press
key to enter into scale
for exit.