Specifications - Fora DUO ultima D40 Bedienungsanleitung

D40 Owner's Manual

Specifications

System performance
Power Source
Device Dimensions (w/o cuff ) 147 (L) x 105 mm (W) x 80 mm (H), 500g with batteries
Memory
Power Saving
System Operating Condition
Device Storage/Transport
Condition
Power Supply Input
Blood glucose measurement performance
Measurement Unit
Linear Range
Precision
Accuracy
Ketone Warning
Blood pressure measurement performance
Pressure Range
Heart Rate Range
Measurement Unit
Systolic Measurement Range
Diastolic Measurement Range 25 mmHg -195 mmHg
Maximum Inflation Pressure
Accuracy of Pressure
Accuracy of Pulse Rate
This device has been tested to meet the electrical and safety requirements of: IEC/EN 60601-1,
IEC/EN 60601-1-2, IEC/EN 61010-1, IEC/EN 61010-2-101, IEC/EN 61326-2-6, EN 301 489-17, EN
300 328.
Reference to Standards:
• EN 1060-1 / EN 1060-3, NIBP-requirements
• IEC 60601-1 General requirement for safety
• IEC 60601-1-2 Requirements for EMC
• EN 1060-4, NIBP clinical investigation
• AAMI/ANSI /IEC 80601-2-30, ANSI/AAMI/ISO 81060-2, NIBP requirements
Four 1.5V AA alkaline batteries or one 3.7V rechargeable
Li-ion battery
Maximum 864 memory records
Automatic power off if system idle for 3 minutes (normal
mode) or 5 minutes (RF mode).
10°C to 40°C (50°F to 104°F), below 85% RH
-20°C to 60°C (-4°F to 140°F), 5 - 95% RH
DC +6V / 1A (max) via Power Plug
mg/dL or mmol/L
20 to 600 mg/dL (1.1 to 33.3mmol/L)
±5 % (CV)
±15 mg/dL (0.83 mmol/L) when glucose < 75mg/dL (4.2
mmol/L)
±20% when glucose ≥ 75mg/dL (4.2 mmol/L)
glucose value is over 240 mg/dL (13.3 mmol/L)
0 - 300 mmHg
40 -199 beat per minute
mmHg
55 mmHg -255 mmHg
280 mmHg
±3 mmHg or ±2% of reading
±4% of reading
EN-25