Fora DUO ultima D40 Bedienungsanleitung Seite 16

Measuring Blood Glucose Test
1. Insert the test strip into its slot.
Wait for the device to display the test strip and blood drop symbol.
2. Select the appropriate measuring mode by pressing
• General Tests (not display) - any time of day without regard to time since last meal.
• - no food intake for at least 8 hours.
• - 2 hours after a meal.
• - testing with the control solution.
3. Obtain a blood sample.
Use the pre-set lancing device to puncture your desired site. After
penetration, discard the first drop of blood with a clean tissue or
cotton. Gently squeeze the punctured area to obtain another drop of
blood. Be careful NOT to smear the blood sample.
The volume of blood sample must be at least 0.5 microliter (μL) of
volume.
4. Press to select the desired user number.
5. Apply the blood sample.
Hold the blood drop to touch the
absorbent hole of the test strip. Blood will
be drawn in and after the confirmation
window is completely filled, the device
begins counting down.
6. Read your result.
The result of your blood glucose test will appear after the device
counts down to 0. This result will automatically be stored in the
memory.
.
(104 mg/dL = 5.7 mmol/L)
EN-14
D40 Owner's Manual