Maintenance/Servicing; Repairs / Overhaul / Modification; Disposal/Recycling - Eaton CROUSE-HINDS Serie Betriebsanleitung

7

Maintenance/Servicing

The required maintenance intervals are set according to their
application and should therefore be determined depending on the
conditions of use.
If during servicing repairs prove to be necessary, section 8 of these
operating instructions will have to be observed.
8 Repairs / Overhaul / Modification
Repairs and overhaul may only be carried out with genuine COOPER
CROUSE-HINDS / CEAG spare parts.
Repairs may only be carried out by COOPER CROUSE-HINDS or a
qualified electrician (Competent person) in compliance with the
applicable national rules.
For replacement and repair only original parts from COOPER
CROUSE HINDS-/ CEAG may be used.
Modifications to the apparatus or changes of its design are not permit-
ted, except for the mounting of additional cable entries and the installa-
tion of supply terminals in accordance with the approval of the apparatus.
9

Disposal/Recycling

When the apparatus is disposed of, the respective national regulations on
waste disposal will have to be observed.
Downloaded from www.Manualslib.com
Empty enclosures GHG 716; industrial
manuals search engine
GB
11