Technical Data; Legende; Safety Instructions; Conformity With Standards - Eaton CROUSE-HINDS Serie Betriebsanleitung

1

Technical data

1.1 Enclosure
Perm. Operating temperature:
Perm. storage temperature in original packing:
Protection category acc. to IEC/EN 60529:
Insulation class acc. to IEC/EN 62262:
Insulation class acc. to IEC/EN 61140:
Test torques:
Cover screws:
Screws and PE connection inside / outside
for screw size
Type:
Power loss:
Tragfähigkeit der Gehäuse:
Empty weight approx.:
Enclosure material:
Enclosure colour:
2

Legende

Warning:
This symbol indicates a serious hazard.
Ignoring this warning can result in death or the destruction of the
installation.
Attention:
This symbol indicates a possible failure. Ignoring this warning can
lead to the total failure of the device, system or operation to which it
is connected.
Note:
This symbol stresses important information.
8
Downloaded from www.Manualslib.com
Empty enclosures GHG 716; industrial
GHG 716 _1 and GHG 716 _2
GHG 716 _3 ... GHG 716 _8
M4
M5
M6
manuals search engine
-55° C up to +95° C
-55° C up to +55° C
IP66 (catalogue version), IP68 (2m); IP69
IK 10
II
1.50 Nm (M4)
3.00 Nm (M6)
1.5 Nm
2.5 Nm
3.0 Nm
GHG GHG GHG GHG
71_1... 71_2... 71_3... 71_4...
3,8 W 7 ,7 W 13 W 21 W
25 Kg 25 Kg 50 Kg 50 Kg
0,3 Kg 0,5 Kg 1,0 Kg 1,5 kg
Aluminum
RAL 7032
2.1

Safety instructions

The operations must be carried out by suitably trained
persons (EN/IEC 60204-1 (VDE 0113)) and specialist
companies with QM-system.
They shall be used for their intended purpose and in perfect and
clean condition.
Prior to being put into operation, the apparatus shall be checked in
accordance with the instructions as per section 6.
The national safety rules and regulations for the prevention of
accidents, as well as the safety instructions included in these
operating instructions, that, like this text, are set in italics, shall be
observed!
3

Conformity with standards

The empty enclosures have been designed, manufactured and tested
according to the state of the art and to DIN EN ISO 9001:2008.
They are conform to the standards specified in the EC-Declaration of
conformity, enclosed separately.
GB
GHG GHG GHG GHG
71_5... 71_6... 71_7 ... 71_8...
25 W 46 W 54 W 96 W
50 Kg 50 Kg 50 Kg 50 Kg
1,8 kg 3,4 Kg 3,8 Kg 6,2 Kg