LENCO KCR-100 Benutzerhandbuch Seite 8

To replace an empty battery, please refer to the figure shown below. When inserting a battery, be sure to do so in the proper
direction.
Push in according to this direction
• If the remote control conflicts with other devices, the operation will be affected.
• Do not simultaneously press buttons on the unit and the remote control.
• Avoid using two remote controls at the same time as it will cause a malfunction.
• Use only CR-2025 size batteries.
• If there is battery leakage, clean the remote control thoroughly before replacing batteries.
• Do not short two terminals of the batteries. Dispose old batteries in a suitable place.
Battery case
CR2025 battery
8
Pull out the battery case