Contents; Important Details For Your Information - Tecsis PEX17 Betriebsanleitung

1. Important details for your information

1. Important details for your information
Read these operating instructions before installing and starting the pressure sensor.
Keep the operating instructions in a place that is accessible to all users at any time.
The following installation and operating instructions have been compiled by us with great care
but it is not feasible to take all possible applications into consideration. These installation and
operation instructions should meet the needs of most pressure measurement applications.
If questions remain regarding a specific application, you can obtain further information:
Via our Internet address www.tecsis.de
„
The product data sheet is designated as DD719/DE719
„
Contact tecsis for additional technical support +49 69 5806-173
„
If the serial number on the product lable and/or the 2D code on the hexagon gets illegible
(e.g. by mechanical damage or repainting), the retraceability of the instrument is not possible
any more.
tecsis pressure sensors are carefully designed and manufactured using state-of-the-art
technology. Every component undergoes strict quality and environmental inspection before
assembly and each instrument is fully tested prior to shipment.
Use of the product in accordance with the intended use PEX17, PEX18:
Use the flameproof pressure sensor to transform the pressure into an electrical signal in
hazardous areas.
Certificate ATEX:
Pressure sensor for operation in hazardous areas in compliance with the respective certificate
(see EC-type examination certificate KEMA 10ATEX0099 X).
ATEX Approval ratings: Flameproof for II 2G Ex d II C T6 ... T1
Knowledge required
Install and start the pressure sensor only if you are familiar with the relevant regulations and
directives of your country and if you have the qualification required. You have to be acquainted
with the rules and regulations on hazardous areas, measurement and control technology and
electric circuits, since this pressure sensor is „electrical equipment" as defined by EN 50178.
Depending on the operating conditions of your application you have to have the corresponding
knowledge, e.g. of aggressive media.
18
Downloaded from www.Manualslib.com manuals search engine
Betriebsanleitung/Operating instructions
GB