SATA J Serie Bedienungsanleitung Seite 17

中文
51086 EN DE RU KO PT JA ES
Operation guideline
Caution: Please read the instruction carefully before operating the machine.
Before the use
1） Charging
This charger and machine shall be used together. Do not use other chargers.
The machine has a protection circuit. When the battery is low, the protection circuit is turned on and the machine stops rotating.
The machine may become hot under the high temperatures or after a long period of operation. At this time, do not charge immediately
but wait until the battery is cooled. Otherwise, the service life of battery will be shortened or the charging failure may be caused due to
overheating.
For the first charging or after a long period of storage, the efficiency of first charging may only reach about 60%. After 2-3 charging and
discharging cycles, the battery efficiency may reach 100%.
2） Installation and removal of battery pack (see Figure A)
Press the lock buttons on both sides of battery pack and pull it out. To insert the battery pack, simply push it into the machine. Avoid the
excessive force
17