Requirements; Setting Up The Coupling Mode; Datastation Maxi Z.ul Datastation Maxi Z.ul - TrekStor DataStation maxi z.ul Handbuch

Downloaded from www.Manualslib.com

4.2) Requirements

Note: The "A " and "m
ggregAtion
under Windows® 2000 , XP and Vista.
• In order to set up one of the 3 coupling modes for the
DataStation maxi z.ul
(KEY) for all of the affected drives. You can do this in the "t
d m " under the "P
eviCe AnAgement
• The drives cannot be operated in 2 different modes at the same time.
DataStation maxi z.ul
• Unmount all
bound, on all of the PCs in your network.
• Other users can re-mount the bound
after the coupling has been set up and the
has been partitioned and formatted.
Note: In the "m " and "s
irroring
DataStation maxi z.ul
secondary
or greater than the primary

4.3) Setting up the coupling mode

NOTE: Back up all the data on your hard disk before using your hard disk in a
coupling mode. When setting up a coupling mode, ALL data on ALL associated
hard disks are irrevocably lost.
• Click on "s "  "P
tArt rogrAms
b m ".
ind AnAgement
• Click on the "b " button to start the Assistant for setting up a
ind
coupling mode. Then click on the "n
• Select from the different coupling modes and the number of drives to be bound.
manuals search engine
" coupling modes are only supported
irroring
, you must have entered the write key
" menu item of the respective device.
roPerties
, which are to be
DataStation maxi z.ul
DataStation maxi z.ul
" coupling modes, the capacity of the
tripe
must be at least the same as
DataStation maxi z.ul
"  "t s ndAs
rek tor softwAre
" button.
ext
– 45 –
s ndAs
rek tor
.
"  " t s ndAs
rek tor
EN