Changing The Mode Of The Trekstor; In The Trekstor Ndas Device Management; Using The Trekstor; Datastation - TrekStor DataStation maxi z.ul Handbuch

Downloaded from www.Manualslib.com
3.4) Change the mode of the TrekStor
maxi z.ul

in the TrekStor NDAS Device Management

A menu opens if you right-click on the symbol for the "t
d m "- in the Info area of the task bar. To change the status
eviCe AnAgement

DataStation maxi z.ul

of a
desired mode in the context menu that appears.
Two different modes can be selected:
a) In the "m (r
ount eAd only
DataStation maxi z.ul
b) In the "m (r / w
ount eAd
DataStation maxi z.ul
access to the
Under the "P " entry, you can obtain miscellaneous information
roPerties
DataStation maxi z.ul
about the
enter the write key of the
"g " register using the "A
enerAl
to it.
Note: The identification number (ID) and the write key (KEY) can be found on
DataStation maxi z.ul
your

3.5) Using the TrekStor

After you have successfully registered and mounted the
maxi z.ul , it appears under "m
use it as a hard disk located on the PC.
Note: If you have mounted the
mode, the disk is write-protected.
manuals search engine

DataStation

, mark it in the menu and select the
)" mode, you only have read access to the
.
)" mode, you have both read and write
rite
. There, if applicable, you can
DataStation maxi z.ul
" button, in order to obtain write access
dd
or on the reverse side of the quick guide.
DataStation maxi z.ul
C " as a "l
y omPuter
DataStation maxi z.ul
– 41 –
s ndAs
rek tor
.
under the
DataStation
d ". You can now
oCAl isk
in read
EN