Electrolux WASL 3 T Benutzerinformation Seite 39

Selection of desired programme
Turn the programme selector to the re-
quired programme. The "Start/Pause"
pushbutton flashes green.
If you turn the programme selector to anoth-
er programme while a cycle is in progress,
the appliance will ignore the new selected
programme. "Err" flashes and the "Start/
Pause"
seconds.
Selecting the temperature
Press the "Temperature"
peatedly to increase or decrease the tem-
perature if you want your washing to be
washed at a different temperature to the
one selected by the appliance (see "Pro-
grammes table"). The
cold wash.
Selecting the spin speed
Press the "Spin"
the spin speed, if you want your washing to
be spun at a different speed to the one se-
lected by the appliance. can also select "No
spin" , "Rinse hold"
4)
plus"
The maximum spin speeds are :
for Cottons , Eco : 1500 rpm, for Cool-
Clean : 1200 rpm, for Lingerie , Wool :
1000 rpm, for Synthetics , Easy Iron , 14
Min , Shirts : 900 rpm, for Delicates , Blan-
ket : 700 rpm.
At the end of the programme, if you have se-
lected "Rinse hold"
plus" , you then need to select a " Spin "
or " Drain "
cycle and empty the water.
Night silence plus : the cycle contains no
spin and ends with a rinse hold.
Selecting options
You must select the different options after
selecting the programme and before press-
ing the "Start/Pause"
"Programme table"). Press the desired but-
ton(s) ; the corresponding symbols appear
on the display. If pressed again, the sym-
bols disappear. If one of the options is not
compatible with the selected programme,
4) Depending on model.
Downloaded from www.Manualslib.com
pushbutton flashes red for a few
pushbutton re-
symbol means a
pushbutton to change
or "Night silence
.
or "Night silence
programme to finish the
pushbutton (see
manuals search engine
"Err" flashes on the display and the "Start/
Pause" pushbutton flashes red.
"Prewash" option
The appliance runs a prewash at 30°C max.
"Rinse plus" option
The washing machine will add one or more
rinses during the cycle. This option is recom-
mended for people with sensitive skin and
in soft water areas.
Temporary : Press the "Rinse plus"
button. The option is only active for the se-
lected programme.
Permanent : Hold down the "Prewash"
and "Delay Start" pushbuttons for a few
seconds. The option is permanently activa-
ted, even if the appliance is switched off. To
deactivate it, repeat the process.
"Delay start"
This option allows you to delay the start of a
wash programme by 30, 60, 90, 2 hours to
20 hours. The selected time appears on the
display for a few seconds.
You can change or cancel the delayed start
time at any time before you press the "Start/
Pause" pushbutton, by pressing the "De-
lay start" pushbutton again (0' indicates
immediate start).
If you have already pressed the "Start/
Pause" pushbutton and you want to
change or cancel the delayed start, pro-
ceed as follows :
• To cancel the delayed start and start the
cycle immediately, press "Start/Pause"
and then "Delay start"
Pause" to start the cycle.
• To change the timer delay period, you
must go through the "Stop"
and reprogramme your cycle.
The lid will be locked during the delayed
start time. If you need to open it, you must
first pause the appliance by pressing the
"Start/Pause" pushbutton. After closing
the lid again, press the "Start/Pause"
pushbutton.
Time Manager
The cycle can be made longer or shorter by
using the "Time Manager"
electrolux 39
push-
. Press "Start/
position
pushbuttons.