Operation; Error Codes; Maintenance; Troubleshooting - Pentair Fleck 5800-SXT Handbuch

Feed Water Hardness
Note:
F
Adjust the water hardness with
G
Press to validate the selection and advance to the next parameter.
Reserve capacity
Note:
H
Adjust the reserve capacity with
I
Press to validate the selection.
Current day of the week
Note:
4 for Thursday, 5 for Friday, 6 for Saturday and 7 for Sunday).
J
Adjust the day of the week with
K
Press to validate the selection.
4.2. Diagnostic mode
To access the recorded informations, press
exit the diagnostic mode.
5 .

Operation

5.1. Recommendations
• Use only regenerate salts designed for water softening EN973;
• for optimal system operation, the use of clean salt free from impurities is recommended (for example salt pellets);
• do not use ice melt, block, or rock salts;
• the sanitizing process (both with liquid and electrochlorination) introduces chlorine elements which may reduce the lifetime
of the ion exchange resins. Refer to the technical guides for resins in common use, providing necessary checks on the
system.
5.2. Manual immediate regeneration
A
Press and hold
6 .

Error codes

The following error codes may be displayed during operation:
---0 Cam sense error:
---1 Cycle sense error:
---2 Regen failure:
---3 Memory error:
---4 Fail safe error:
7 .

Maintenance

Mandatory:
functioning of the complete system, and be documented in the Maintenance record book.
Mandatory:
8 .

Troubleshooting

Please follow this procedure for any technical support:
A
Collect the required information for a technical assistance request.
→
Product identification (see 2.1. Serial label location, page 5 and Original settings, page 2).
B
Contact your local dealer who installed this device (see contact details on last page).
→
Also call him if the water tastes salty, if the water is not softened or if there is no salt consumption.
Ref. MKT-UG-004 / B - 16.01.2018
Downloaded from www.Manualslib.com
Determine the feed water hardness in °tH.
and
Determine the reserve capacity in Litre or in percentage.
and
Determine the day of regeneration (1 for Monday, 2 for Tuesday, 3 for Wednesday,
and
and
for 5 seconds.
Unplug the unit and plug it back. If error continue, call technical support.
Unplug the unit and plug it back. If error continue, call technical support.
Perform a manual regeneration. If error continue, call technical support.
Call technical support.
Unplug the unit and plug it back. If error continue, call technical support.
Cleaning and maintenance shall take place at regular intervals in order to guarantee the proper
The maintenance must be done by a professional certified by Pentair, otherwise the warranty will void.
manuals search engine
.
.
.
simultaneously for 5 seconds. Press
User Guide Fleck 5800-SXT
to see the next data. Press
7 / 36
to