Interlogix TruVision DVR 45HD Schnellstartanleitung Seite 4

Figure 2: Front panel controls (8-channel model shown)
Name
. Channel buttons
1
. Display buttons
2
. Menu and
3
Search buttons
. Status LEDs
4
EN 2
Downloaded from www.Manualslib.com
Description
Switch between different cameras in live, PTZ control or playback modes.
Use the soft keyboard to enter numerals 0 to 9.
F1: In playback mode, click to start and stop video clipping. For audio, press F1
and a numerical button to play the audio of the specified camera in live view.
In System Information mode, get the DDNS URL. In User Management mode,
pop up the Permission screen of a selected item in User Management > User >
User Management. Delete a selected item from USB flash drive. Exit the virtual
keypad.
F2: In live view mode, all-day playback, and playback modes press to display or
hide the time or control bar. In PTZ mode, stop all ongoing operations. Select or
deselect an item. Enter a selected folder of the external storage device, such as
a USB flash drive used for archiving.
A: In live view mode, select the main monitor.
B: In live view mode, select the event monitor.
Seq: In live view mode, start/stop sequencing cameras on the current monitor.
Display: In multiview mode, toggle through the various multiviews. For 8-ch
DVR: full, quad, 1+5, 1+7 and 9). For 16-ch DVR: full, quad, 1+5, 1+7, 4+4 and
9.
In HDD information mode and user management mode delete a selected item. In
PTZ mode, delete a selected key point. In Log Search mode, display the details
of a log file in Log Search result.
Menu: Enter/exit the main menu.
Search: In live view mode, enter the advanced search menu.
Power: A steady green light indicates the recorder is working correctly. Red
indicates a fault.
Event Alarm: A flashing red light indicates that there is a sensor Alarm In or
another alarm such as motion or tampering. No light indicates that there is no
alarm.
HDD: HDD indicator blinks red when data is being read from or written to the
HDD. A steady red light indicates an HDD exception or error.
Tx/Rx: Steady green indicates a normal network connection. No light indicates
that it is not connected to a network.
manuals search engine
TruVision DVR 45HD Quick Start Guide