Cleaning And Maintenance - Concept VV5620 Bedienungsanleitung

EN
O = unit is switched off.
= very low air flow
= very strong air flow
5. Select the desired air temperature using the regulator (7).
= low temperature
= mean temperature
= high temperature.
6. During drying, style your hair using a comb. Keep a safe distance in order to avoid burning the hair and skin, or
sucking your hair into the inlet grille.
7. The COOL function (flow of cold air) - is used for quick cooling of your hair, and subsequently gives better hold to the
hairstyle. To activate this function, press button (6) - the blue control lamp of the COOL function (2) will be switched
on. You can switch the COOL function off by releasing the button (6).
Note: If you press the button (6) and slide upwards, the COOL function will remain switched on continuously.
8. When putting down the unit during use, always switch it off.
9. The removable nozzle enables aiming a narrow air stream towards the comb or brush you are using on your hair.
10. Switch the unit off after use.
11. When using the unit in a bathroom, make sure you switch it off immediately after use, and disconnect it from the
wall outlet, as the proximity of water and any contact of the unit with water are very dangerous, even if the unit is
switched off.
12. The hanging loop enables you to hang up the unit to store it.
Ionizer function
Negative ions break up the water droplets, which results in faster hair drying. A
shorter drying time is better for the hair, keeps a softer structure and increases
the shine. To switch the ionizer on/off, use the respective button (9) (Fig. 1). If the
control lamp (3) is switched on, it indicates the ionizer operation.

CLEANING AND MAINTENANCE

Warning!
Always disconnect the power supply cable from the mains outlet before cleaning
the appliance.
Make sure the appliance has cooled down before handling it.
Only use a wet cloth for cleaning the surface; never use detergents or hard objects,
as they may damage it.
Check the cleanliness of inlet and outlet grilles after each use. If necessary, press
the button for releasing of the inlet grille (5), remove inlet grille (4), clean it and
replace.
Never clean the unit under running water, do not rinse it or submerge in
water.
VV5620
Fig. 1
Fig. 2
19