Maintenance And Cleaning; Troubleshooting; Environmental Protection - Concept VV5616 Bedienungsanleitung

10) When using the unit in a bathroom, make sure you switch it off immediately after
use, and disconnect it from the wall outlet, as proximity of water or any contact of
the unit with water is very dangerous, even if the unit is switched off!
11) The hanging loop enables you to store the unit hanging up.

MAINTENANCE AND CLEANING

WARNING!
Before cleaning the unit, always disconnect the power cord from the wall outlet!
Prior to handling, make sure the unit has cooled down!
The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents or hard objects as they may
damage the unit's surface!
Never clean the unit under running water, do not rinse it, and do not submerge it in water!

TROUBLESHOOTING

Problem
Motor does not run.
Motor has stopped
operating.
REPAIRS & MAINTENANCE
Any extensive maintenance or repair requiring access to the internal parts of the product shall be performed by an
authorized service center.

ENVIRONMENTAL PROTECTION

• Packaging materials and obsolete appliances should be recycled.
• The transport box may be disposed of as sorted waste.
• Polyethylene (PE) bags shall be handed over for recycling.
Recycling at the end of the service life:
A symbol on the product or its packaging indicates that this product should not be disposed of as household
waste. It must be taken to the collection point authorized for recycling electric and electronic equipment. By
making sure this product is disposed of properly, you will help prevent negative effects on the environment
and human health that would otherwise result from inappropriate disposal of this product. You can learn more about
recycling this product from your local authorities, a household waste disposal service, or in the shop where you
purchased this product.
20
Cause
Plug inserted into the mains outlet
incorrectly or insufficiently.
The mains outlet is not live.
Supply cable is damaged.
Improper or insufficient air flow. Motor
overheating fuse activated.
Solution
Check the plug connection.
Check for voltage, e.g. by connecting
another appliance.
Refer the unit to an authorized service
center for testing and repair.
Disconnect the cable from the socket.
Check and clear the air passage on the inlet
and outlet grilles. Let the unit cool down.
EN
VV5616, VV5618