Pentair MICROBRITE Installationsanleitung Seite 12

12
OPERATING MICROBRITE® COLOR LED LIGHT USING AN
INTELLIBRITE® CONTROLLER
Wiring MicroBrite Color LED Lights to IntelliBrite Controller and 300 Watt
Transformer
The following diagram shows how to connect MicroBrite Lights to an IntelliBrite
Controller using a 300 Watt transformer.
~
230 V AC
Wall Outlet
Selecting color and chow modes using an IntelliBrite
Controller
The MicroBrite color light can be controlled with the
IntelliBrite Controller (p/n 620139, sold separately). The
IntelliBrite® Controller provides complete control of your
MicroBrite color lights. Just dial in any one of the pre-
programmed color light shows or fixed colors.
Using the IntelliBrite Controller:
MicroBrite color lights are compatible with IntelliBrite
colors and shows and can be synchronized with Intel-
liBrite color lights and landscape lights. To select a
color light show mode or fixed color mode, rotate the
dial so that it points to the desired selection. The color
mode selections start in a clockwise direction from the
9 o' c lock position.
MicroBrite color led light for pool and spa Installation and User' s Guide
ELECTRICAL CONNECTION
Wire
connectors
IntelliBrite Controller
230 V AC ~
Transformer compliant with
NF EN 61558-2-6
12 V AC ~
2A
2A
Hold and Recall Feature
• Hold button/LED: Press this button (LED on) to
capture and save a color effect while displaying
one of the light show modes. When the button is
pressed, the LED will be on, indicating that the
color effect is captured.
• Recall Button/LED: Use this button (LED on) to
activate the last saved color effect. When the but-
ton is pressed, the LED will be on, indicating that
the color effect is being displayed.
Junction box
Wire connectors