Cleaning And Maintenance; Technical Specifications - HQ Power EXCALIBOR I Bedienungsanleitung

MODE 4: Press the MODE/ESC button until the display shows
UP/DOWN buttons.
confirm the desired function. The display will show the "DMX" or "MASTER/SLAVE" mode that you
selected before.
MODE 5: Press the MODE/ESC button until the display shows
UP/DOWN buttons.
button to confirm the desired function. The display will indicate the "DMX" or "MASTER/SLAVE" mode that
you selected before.
MODE 6: Press the MODE/ESC button until the display shows
UP/DOWN buttons.
button to confirm the desired function. The display will indicate the "DMX" or "MASTER/SLAVE" mode that
you selected before.
MODE 7: Press the MODE/ESC button until the display shows
the UP/DOWN buttons.
means a pan rotation of 180°. Press the ENTER button to confirm the desired function. The display will
indicate the "DMX" or "MASTER/SLAVE" mode that you selected before.
MODE 8: Press the MODE/ESC button until the display shows
the UP/DOWN buttons.
Press the ENTER button to confirm the desired function. The display will indicate the "DMX" or
"MASTER/SLAVE" mode that you selected before.
MODE 9: Press the MODE/ESC button until the display shows
MODE 10: Press the MODE/ESC button until the display shows
default mode.

7. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. Contact your dealer for spare parts if necessary.

8. Technical Specifications

Power Supply
Power Consumption
Fuse
LEDs
Shutter Flash Rate
Dimensions
Total Weight
PAN Movement
TILT Movement
For more info concerning this product, please visit our website www.hqpower.com.
The information in this manual is subject to change without prior notice.
VDPL3601MHW12
is the tilt mode and
is the normal mode and
is the 12-channel mode and
means a pan rotation of 540°,
means a tilt of 270°,
max. 230VAC / 50Hz
max. 50W
F 5A, 250VAC (5 x 20mm) (order code FF5N)
12 x red; 12 x green; 12 x blue
0 ~ 10Hz
415 x 395 x 654mm
9.4kg
540°
270°
7
and set the desired function via
is the invert tilt mode. Press the ENTER button to
and select the desired function via the
means the display is inverted. Press the ENTER
and select the desired function via the
is the 4-channel mode. Press the ENTER
and select the desired function via
means a pan rotation of 360° and
and select the desired function via
means a tilt of 180° and
. Press the ENTER button to reset the system.
. Press the ENTER button to return to the
means a tilt of 90°.
HQPOWER