Herunterladen Diese Seite drucken
HQ Power VDLC4000 Kurzanleitung

HQ Power VDLC4000 Kurzanleitung

4-kanal-lichtsteuerung
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

VDLC4000 – 4-CHANNEL LIGHT CONTROLLER
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VDLC4000! This is a 4-channel light controller with sound control. It should come with this
manual. If the device was damaged in transit, don't install or use it and contact your dealer.
Please read the manual thoroughly before bringing this device into service.
2. Safety Instructions
Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• A qualified technician should install and service this device.
• This device falls under protection class I. It is therefore essential that the device be earthed. Have a qualified
person carry out the electric connection.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• Keep the device away from children and unauthorised users.
3. General Guidelines
• This device is designed for professional use in discos, theatres, etc. The VDLC4000 should only be used indoors
with an alternating current of max. 230VAC / 50Hz.
• These effects are not designed for permanent operation: regular operation breaks will prolong their lives.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a location where the device is protected against extreme heat (see "Technical Specifications"), dust and
moisture. Respect a minimum distance of 0.5m between the device's light output and any illuminated surface.
• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
people. Any damage that may occur will most probably be due to unprofessional use of the device.
• Use the original packaging if the device is to be transported.
• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
crash, etc. Using the device in an unauthorised way will void the warranty.
VDLC4000
1
VELLEMAN
loading

Inhaltszusammenfassung für HQ Power VDLC4000

  • Seite 12 Falls Zweifel bestehen, wenden Sie sich für Entsorgungsrichtlinien an Ihre örtliche Behörde. Danke für den Kauf der VDLC4000! Es handelt sich um eine 4-Kanal-Lichtsteuerung mit Lautstärkeregelung. Diese Bedienungsanleitung sollte mitgeliefert sein. Überprüfen Sie, ob Transportschäden vorliegen. Sollte dies der Fall sein, verwenden Sie das Gerät nicht und wenden Sie sich an Ihren Händler.
  • Seite 13 • Dieses Gerät ist eine Lichtsteuerung für den professionellen Einsatz auf Bühnen, in Discotheken, Theater, usw. Der VDLC4000 ist nur für den Anschluss an einen AC-Strom von max. 230VAC / 50Hz zugelassen und wurde ausschließlich zur Verwendung in Innenräumen konzipiert.
  • Seite 14 1. Verwendete Schrauben müssen fest angespannt werden und dürfen keine Rostspuren zeigen. 2. Sorgen Sie dafür, dass die Netzkabel nicht beschädigt sind. Lassen Sie das Gerät von einer Fachkraft installieren. 3. Trennen Sie das Gerät vom Netz ehe Sie mit den Servicearbeiten anfangen. VDLC4000 VELLEMAN...
  • Seite 15 6. Bestellen Sie eventuelle Ersatzteile bei Ihrem Fachhändler. 6. Technische Daten Stromversorgung max. 230VAC / 50Hz Ausgangsleistung max. 900W / Kanal Eingangspegel Sound 150mV / 100 kohm T500mA, 250VAC (Artikelnummer FU0.5N) Sicherung Abmessungen 480 x 240 x 121.5mm Gesamtgewicht 4.80kg Alle Änderungen vorbehalten. VDLC4000 VELLEMAN...