Braun CareStyle 5 Handbuch Seite 14

residual moisture before going on ironing other
parts of it.
(C) Precision shot
• Press the precision shot button (16) completely
down.
• Steam will come out of the tip area of the
soleplate only.
• To stop this function release the button.
• If you do not press it down completely, some
steam may also come out from the rear steam
holes in the soleplate.
(D) Boiler Sleep Mode
In the sleep mode the temperature of the boiler
goes down in order to reduce power consumption.
Please note, that the temperature of the iron
remains unchanged.
• It is activated if there has been no steam
emission for 10 minutes.
• To restart steam ironing either press the steam
button (15) or the reset button (4).
After ironing / storage
• Press the On/Off button (1) to turn off the
appliance.
• Unplug and let the appliance cool down before
storing.
• Empty the water tank.
• Lock the iron.
(E) Lock system
The appliance is equipped with a lock system for
convenient transportation and easy storage. It
is possible to lift and carry the appliance on the
handle of the locked iron.
Note: Before transportation make sure the iron is
properly locked and the water tank is empty.
• Place the soleplate into the recess on the iron mat.
• To lock the iron push the slider (13) (easy lock)
toward the iron until you hear a «click».
• To unlock the iron push down the button on the
slider (easy lock). The iron will be released.
(F) Descaling
Never open or touch the closure (11) when the
appliance is hot and/or plugged in.
To maintain optimum performance, the system
needs to be decalcifi ed after every 15 litres of water
consumption (about 8 complete refi lls).
14
Do not use any chemicals, additives or descaler to
rinse the boiler.
The LED (3) is fl ashing to indicate it is time for
descaling.
a. Switch off (1) and unplug the appliance. Unlock
the iron and remove it from the iron rest. Wait
until the appliance has cooled down (minimum
2.5 hours).
b. Empty the water tank.
c. Place the appliance on the edge of the sink and
open the transparent cover (10).
d. Turn the closure (11) anticlockwise to open it.
e. Let the water fl ow into the sink.
f. Turn the appliance slightly in an inclined position
to empty the boiler completely.
g. When no more water comes out of the appliance
screw the closure to close the boiler and close
the transparent cover.
h. After having fi nished the descaling procedure,
plug in and switch on.
i. Press the reset button (4) for 5 seconds until the
LED (3) turns off .
If the appliance is switched off without descaling
the LED (3) will start to fl ash again when it is next
switched on.
Note: Because of the diff erent water composition
by using an installed in-house permanent descaler,
it is recommended to descale the system after
every 4 complete refi lls or at least once per month.
Please note that in this case the icon for descaling
will not automatically start fl ashing.
(G) Care and Cleaning
• Before cleaning, always make sure that the
appliance is switched off , unplugged and has
cooled down completely.
• To clean the soleplate it is suggested to use a
damp cloth.
• To clean the soft material on the handle and the
high glossy surface use a damp cloth only.
• Never use chemicals, vinegar or scouring pads
(eg. sponges with coarse nylon fabrics etc).
For UK Only
Guarantee Information
All Braun Household products carry a minimum
guarantee period of two years. The rights and
benefi ts under this guarantee are additional to your
statutory rights which are not aff ected.
Please keep your receipt as this will form the
basis of your guarantee.
In the unlikely event of a breakdown you have access
to professional help from our team simply by calling:
02392 392333