Extra Functions; Locking The Controls; Setting A Delayed Start Time; Smart Diagnosis - LG STYLER S3*F Serie Bedienungsanleitung

EXTRA FUNCTIONS

Some buttons also activate special functions,
including Night Care, Remote Start, Wi-Fi.

Locking the Controls

Use Control Lock to prevent unwanted use of
the Styler or to keep cycle settings from being
changed while the Styler is operating.
1 Touch and hold the Gentle Dry icon and
the Delay Start icon for three seconds to
activate or deactivate the Control Lock
function.
2 "CL" appears in the display, and all controls
are disabled except the Power button.
• Control Lock does not lock the door.
• The Control Lock setting is retained even if
there is a power outage.
• Once set, Control Lock remains active until it
is manually deactivated. Control Lock must be
deactivated to run another cycle.
3 seconds

Setting a Delayed Start Time

Use the Delay Start function to delay the start
time of the cycle.
1 Touch Power
2 Touch the cycle selector icon for the
desired cycle.
3 Touch Delay Start to set the start time of
the cycle.
The default delay time is three hours.
Each time you touch the button, the time
increases by an hour, up to 19 hours.
• Touch and hold the button to increase the
delay time more quickly.
CAUTION
• Do not open the door during operation.
There is a risk of burns or injury from
escaping hot air or steam.
• Do not allow steam or hot air to escape
the cabinet during operation. Opening
the door during operation also affects
performance, lengthens drying time, and
results in water condensing and collecting on
the floor.

* Smart Diagnosis™

Use this function with the LG SmartThinQ
application on a smart phone or when contacting
the Goldiran Customer Information Center to
help diagnose problems with the Styler.
OPERATION 35