LG STYLER S3*F Serie Bedienungsanleitung Seite 28

28 OPERATION
Opening and Closing the Pants Hanger
1 To open, fold the hook down toward the
hanger blades to unlock and separate the
blades.
hook
hanger
blades
2 Once pants are inserted, bring the blades
together and rotate the hook up and away
from the blades to lock them in place.
Hanging Pants On the Pants Hanger
1 Remove all objects from pants pockets and
button the back pockets.
2 Fold pants along crease
lines (or where crease
lines would be), and
attach the pants hanger
at the ends of the pants
legs.
3 Tug gently on the sides of the pants legs.
Make sure pants are stretched tight within
the hanger, with no wrinkles, and will not
fall out of the hanger during the cycle.
4 Place the pants hanger on the moving
hanger or in the Pants Crease Care.
Using the Pants Crease Care
1 Open the Pants Crease Care by pressing on
the icon on the side.
2 Hang the pants hanger on the hook above
the Pants Crease Care that best fits the
length of the pants being pressed.
If the pants are longer, use the higher hooks to keep
the pants from hitting the floor of the cabinet.
Pants should be no wider than 38 in. (96 cm) or
longer than 43.3 in. (110 cm). Check the size of the
pants before using the Pants Crease Care. If pants
are too large, use the moving hanger.
3 Make sure the pants
are hanging straight.
Check the creases on the legs
to make sure they are lined
up. Fix the pants with 2 clips
before closing the Pants Crease
Care. If the pants legs are not
aligned properly or the pants
are not hanging straight, double
lines may appear at the pants'
edges, or the pants may be wrinkled.
4 Close the Pants Crease
Care, then straighten
the pants once more.
Gently tug the edges of the
pants to smooth out any
wrinkles. Make sure the
pants are hanging straight in
the Pants Crease Care.