Checking The Filters Before Every Load; Checking The Lint Filter; Changing The Aroma Sheet - LG STYLER S3*F Serie Bedienungsanleitung

CHECKING THE FILTERS
BEFORE EVERY LOAD

Checking the Lint Filter

Always make sure the lint filter is clean before
starting a new load; a clogged lint filter will
increase drying times.
1 Open the front grill and take out the lint
filter.
2 Brush the filter with a soft brush or clean
it with a vacuum cleaner.
If the lint filter is torn or damaged, replace it
with a new filter.
3 Reinstall the filter.
CAUTION
• Check that the sides are aligned
correctly when inserting the grill.
Left

Changing the Aroma Sheet

Use a dryer fabric softener sheet to add a refreshing
aroma to items. Replace the fabric softener sheet
after every use.
1 Remove the aroma filter from the Styler.
2 Open the aroma filter and insert a dryer
3 Close the aroma filter and insert it back in
Right
4 When the cycle is complete, remove the
Tip : Spray perfume 4-5 times on a cotton pad
fabric softener sheet into it.
the Styler.
Insert the aroma filter in the direction of the
arrow. You can adjust the opening of the
perfume filter using the adjustment lever.
The more open the aroma filter is, the richer
the aroma gets.
Closed
aroma filter and discard the fabric softener
sheet.
and then place it in the Aroma Holder to use.
(However, the fragrance strength can vary
depending on the scent.)
OPERATION 25
Open