Assembling The Drip Tray; Installing Cap Covers; Installing Hinge Covers - LG STYLER S3*F Serie Bedienungsanleitung

ASSEMBLING THE DRIP TRAY

Before using the Styler, insert the drip tray onto
the bottom of the cabinet.
1 Hold the tray so the arrow and letter on
the front of the tray face up.
2 Insert one side of the tray first, then
the other. Push the tray until it slides
completely in.
3 To detach, pull one side out then the other.
If the tray collects water, detach it and empty
the water. After emptying it, re-assemble the
tray.
• Do not operate the Styler without
installing the drip tray. Doing so could lead
to water damage caused by leaking.

INSTALLING CAP COVERS

1 Line up the nubs on the cap
cover with the holes in the top
corner of the cabinet.
2 Snap the cap cover into place.
Repeat with the remaining cap
cover on the other corner.

INSTALLING HINGE COVERS

1 Open the Styler door.
2 Snap the hinge cover onto the lower hinge
assembly with the bent edge on the far
side from the hinge.
3 Repeat with the remaining hinge cover on
the upper hinge assembly.
INSTALLATION 19