Installation Location Requirements; Clearances - LG STYLER S3*F Serie Bedienungsanleitung

INSTALLATION LOCATION REQUIREMENTS

WARNING
Read all installation instructions completely before installing and operating the
Styler. It is important to review this entire manual before installing and using the Styler.
The installation requires:
y A grounded electrical outlet located within
2 ft. (61 cm) of either side of the appliance.
WARNING
• Do not install or store the Styler in an area where it will be exposed to water and/or
weather. Failure to follow this warning could result in risk of electric shock, injury, or product
damage or malfunction.

Clearances

CAUTION
• The floor must be level, with a maximum slope of 1 inch (2.5 cm) under the Styler. If the
slope is greater than 1 inch (2.5 cm), the appliance cannot be leveled properly.
• Do not install the Styler on a hollow or flexible platform. Doing so may cause excessive
noise and vibration and result in damage or injury if the product tips over.
15
56 ½ in.
(1435 mm)
16 / in.
5
16
(415 mm)
/ in. (385 mm)
5
32
y A sturdy floor to support the total appliance
weight of 183 lbs (83 kg). The combined
weight of any other laundry appliances
should also be considered.
2 / in.
3
64
(52 mm)
23 in. 17 ½ in.
(585 mm) (445 mm)
INSTALLATION 15
72 / in.
13
16
(1850 mm)