Rossler RX600G Bedienungsanleitung Seite 27

Assembly
Assembly
STEP 1
REX_Trainer_RX600G_13.indd GB-27 REX_Trainer_RX600G_13.indd GB-27
WARNING
1. Release the four screws (56), spring washers (49) and
washers (77) from the front or rear foot (2 + 3).
2. Mount both feet to the main frame (1) using the
screws, spring washers and washers released in Step 1
(see Fig. 1).
3. Release the six screws (55), six spring washers (49)
and two washers (49) from the handlebar support
tube (4).
4. Push the cover (111) onto the handlebar support tube
(4) (see Fig. 2).
5. Connect the upper computer cable to the lower com-
puter cable (15 + 19).
6. Insert the handlebar support tube (4) into the main
frame (1).
7. Mount the handlebar support tube using the screws
released in Step 4.
8. Push the cover (111) over the screw connection (see
Fig. 3).
GB-27
21.05.13 10:46 21.05.13 10:46