Important Information - Kettler MEDIC Montageanleitung

GB
Assembly Instructions
Before beginning your program of training, study the instructions for training carefully.
You receive important indications for your safety as well as for using and servicing the Stomach Trainer. Please keep
the manual carefully for your information or else for servicing or any spare part orders.
For Your Safety
The Stomach Trainer should be used only for its intended pur-
■
pose, i.e. for physical exercise by adult persons.
Any other use of the equipment is prohibited and may be dan-
■
gerous. The manufacturer cannot be held liable for damage or
injury caused by improper use of the equipment.
The Stomach Trainer has been designed in accordance with the
■
latest standards of safety. Any features which may have been a
possible cause of injury have been avoided or made as safe as
possible.
Incorrect repairs and structural modifications (e.g. removal or re-
■
placement of original parts) may endanger the safety of the user.
Damaged components may endanger your safety or reduce the
■
lifetime of the equipment. For this reason, worn or damaged
parts should be replaced immediately and the equipment taken
Handling the equipment
Before using the equipment for exercise, check carefully to en-
■
sure that it has been correctly assembled.
It is not recommended to use or store the apparatus in a damp
■
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
The Stomach Trainer is designed for use by adults and children
■
should not be allowed to play with it. Children at play behave
unpredictably and dangerous situations may occur for which
the manufacturer cannot be held liable. If, in spite of this, child-
Instructions for Assembly
Ensure that you have received all the parts required (see check
■
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully
■
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
The equipment must be assembled with due care by an adult
■
person. If in doubt call upon the help of a second person, if
possible technically talented.
Please note that there is always a danger of injury when wor-
■
king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.
Ensure that your working area is free of possible sources of
■
danger, for example don't leave any tools lying around. Al-
ways dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if child-
ren play with plastic bags!
List of spare parts
When ordering spare parts, always state the full article number,
spare-part number, the quantity required and the inspection number
stamped on the back.
Example order: Art. no. 7822-600 / spare-part no. 10100030/ 2
pieces / inspection no......
Important: spare part prices do not include fastening material; if fas-
tening material (bolts, nuts, washers etc.) is required, this should be
4
out of use until this has been done. Use only original KETTLER
spare parts.
In case of enquiry, please contact your KETTLER dealer.
■
If the equipment is in regular use, check all its components
■
thoroughly every 1–2 months. Pay particular attention to the
tightness of bolts and nuts.
Instruct persons using the equipment (in particular children) on
■
possible sources of danger during exercising.
Before beginning your program of exercise, consult your doc-
■
tor to ensure that you are fit enough to use the equipment. Base
your program of exercise on the advice given by your doctor.
Incorrect or excessive exercise may damage your health.
ren are allowed to use the equipment, ensure that they are in-
structed in its proper use and supervised accordingly.
The Stomach Trainer complies with the DIN EN 957 - 1/5,
■
class H. It is therefore unsuitable for therapeutic use.
On principle, the equipment does not require any special main-
■
tenance.
Do not use corrosive or abrasive materials to clean the equip-
■
ment. Ensure that such materials are not allowed to pollute the
environment.
The fastening material required for each assembly step is sho-
■
wn in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
Bolt all the parts together loosely at first, and check that they
■
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be repla-
ced.
For technical reasons, we reserve the right to carry out prelimi-
■
nary assembly work (e.g. addition of tubing plugs).
Please keep original packaging of this article, so that it may be
■
used for transport at a later date, if necessary.
clearly stated on the order by adding the words „with fastening ma-
terial".
KETTLER (GB) Ltd. · Merse Road · North Moons Moat · Redditch, Worce-
stershire B98 9HL · Great Britain
KETTLER International Inc. · 1355, P. B. 2747 · Virginia Beach · VA 23450 USA
www.kettler.net