Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

GB

Assembly Instruction

Please thoroughly read these instructions prior to assembly and first use of this KETTLER product. You will find
important information concerning your security as well as the use and maintenance of this KETTLER product.
Carefully keep these instructions for your reference and/or for maintenance jobs and spare parts orders.
This KETTLER product has been designed in accordance with the latest state of safety regulations
and its manufacture has constantly been monitored with regard to quality. Knowledge gained
therefrom becomes part of our development activities. For this reason, we reserve the right to
modifications regarding technique and design in order to supply our customers always with opti-
mal product quality. Should you nevertheless have reason for complaints, please contact your
specialised dealer.
For your security
Only use this massaging apparatus for its intended purpose. Any other use is inadmissible
and possibly dangerous. The manufacturer cannot be hold responsible for any damage cau-
sed by a use not being in accordance with the intended purpose.
Defective parts may endanger your security and affect the apparatus's service life. In short
intervals – fitting the use of the apparatus – check all parts as to possible damage and loose
connections (screws, plug-in connections, etc.).
Immediately exchange defective or worn parts and do not use the apparatus until it has been
repaired. Repairs at electrical components must only be performed by KETTLER service!
Should a repair be necessary, please contact the following address.
In case of a damage or an alleged damage of the mains connection cable do no longer use
the apparatus and have it repaired by KETTLER service!
The apparatus corresponds to the existing safety regulations and is TÜV-GS certified.
Improper repairs and structural changes (disassembly of original parts, attachment of inad-
missible parts, etc.) may cause risks for the user.
It is not recommended to use or store the apparatus in a damp room. Please ensure that no part
of the machine comes in contact with liquids (drinks, perspiration etc.). This may cause corrosion.
The apparatus requires a system voltage of 220-230 V, 50 Hz. Only connect it to a socket
outlet with earthing contact which is individually fused with 16 A. Never perform any ope-
rations at your network yourself! Instead, have qualified personnel perform such operations!
Do not use any multiple socket-outlets for connection! If you use an extension cord, it has to
correspond to the VDE regulations.
After use, always pull the apparatus's mains plug out of the socket outlet.
In case of cleaning and maintenance jobs the apparatus must be de-energised (pull out mains plug)!
Pay attention to the fact that no liquid gets into the apparatus's inside!
■ If the equipment is in regular use, check all its components thoroughly every 1 - 2 months. Pay particular
attention to the tightness of bolts and nuts.
Also pay attention to the general safety regulations and arrangements for the handling of
electrical appliances.
Handling
Use the apparatus only after checking that the assembly has properly been effected and con-
trolled by an adult person.
You may select to steps for massaging. "Playfully" changing motor speed during operation
may damage electrical parts and affect the service life of the apparatus. The apparatus will
start with the pre-selected speed (MIN. or MAX.) immediately after pressing the ON switch.
After half an hour of uninterrupted use the "MASSAGER" must be switched off for one hour
owing to the natural heat generation. If the apparatus is overloaded, the overload protection
integrated in the motor will respond. Then, the "MASSAGER" may only be started again after
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis