Specifications - Makita DKP180Z Betriebsanleitung

ENGLISH (Original instructions)
1. Button
2. Red indicator
3. Battery cartridge
4. Indicator lamps
5. Check button
6. Star mark
7. Pointer
8. Knob
9. Lock-off lever
10. Switch trigger
11. Planer blade
12. Rear base
13. Foot
14. Socket wrench
15. Bolt
16. Loosen
17. Tighten
18. Bolts
19. Drum

SPECIFICATIONS

Model
Planing width
Planing depth
Shiplapping depth
No load speed (min
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Intended use
The tool is intended for planing wood.
General power tool safety
warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
6
Explanation of general view
20. Drum cover
21. Adjusting plate
22. Inside edge of gauge plate
23. Blade edge
24. Screws
25. Heel
26. Back side of gauge base
27. Gauge plate
28. Gauge base
29. Pan head screw
30. Planer blade locating lugs
31. Heel of adjusting plate
32. Set plate
33. Inside flank of gauge plate
34. Back side of gauge base
35. Mini planer blade
36. Groove
37. Hex. flange head bolts
38. Nozzle
-1
)
D.C.14.4 V Model
D.C.18 V Model
ENE001-1
GEA010-2
39. Dust bag
40. Fastener
41. Elbow
42. Start
43. End
44. Cutting line
45. Screw
46. Edge fence (optional accessory)
47. Sharpening holder
48. Wing nut
49. Blade (A)
50. Blade (B)
51. Side (D)
52. Side (C)
53. Limit mark
54. Brush holder cap
55. Screwdriver
DKP140
82 mm
1.6 mm
9 mm
15,000
329 mm
3.0 - 3.3 kg
D.C. 14.4 V
BL1415N/BL1430/BL1430B/BL1440/BL1450/BL1460B
BL1815N/BL1820/BL1820B/BL1830/BL1830B/BL1840/
BL1840B/BL1850/BL1850B/BL1860B
DC18RC/DC18RD/DC18RE/DC18SD/DC18SE/DC18SF
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
DKP180
2 mm
333 mm
3.2 - 3.5 kg
D.C. 18 V