Language Settings; Aerial Installation - Schaub Lorenz 22LT475CD Bedienungsanleitung

Active Antenna(*)
Use " " or " " buttons to highlight Active Antenna
option. When antenna power option is set as On by
pressing " " or " " button, +5V will be transmitted to
the antenna output.This feature enables the use of
active antenna.
Note: Antenna power should be "Off" when standard
antenna is used instead of the active antenna.
Broadcast Type
When you set the desired broadcast type by using "
" or " " button, the TV will display the related channel
list. If the related source has does not include any
stored channels, "No channels for this type have
been found." message will be displayed on the
screen.

Language Settings

In this menu the user can adjust the preferred language.
Select "Language" item in the Setup menu and press
OK button. Then language settings menu will be
displayed.
.
You can set the desired language options by using "
" /" " and " "/" " buttons.
(*) optional.
Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will
function as described below:
Language Settings
Use " " or " " buttons to highlight the menu item
that will be adjusted and then press " " or " " button
to set.
• Audio Language is used for selecting the soundtrack
of a channels. Primary settings are the  rst priority
when multiple choices are available on a broadcast.
Secondary settings are the alternatives when the
 rst options are not available.
• Guide Language: If the received EPG data includes
the selected guide language, EPG data language
will be changed accordingly.
•Teletext language sets the desired teletext
language.
• Media Subtitle: In order to display subtitles properly
while viewing a media  le via Media Browser, use
this setting to select a movie subtitle language.
By pressing " " or " " button, select the desired
language option (optional).
Installation
The Installation menu is mainly intended to help you
for creating a Channel Table in most ef cient way.
Select Setup option in the main menu and press OK
button. Installation menu items will then be displayed.
Select Installation from the list by pressing " " or "
" buttons.

Aerial Installation

Select Aerial Installation line and use OK button to
view the menu contents:
Automatic Channel Scan
Automatic channel scan is started by pressing
OK button while Automatic channel scan item is
highlighted. The following message appears on the
screen:
Highlight Yes or No by using " " or " " buttons
and press OK button to con rm. If Yes is selected,
automatic search starts. Selecting No cancels
automatic search. After search is completed for digital
channels, a message asking whether to search for
analogue channels appears on the screen:
English - 68 -