Installing The Keyboard Lattice; Tastatur; Removing The Keyboard - Dell Precision 7550 Serviceanleitung

Installing the keyboard lattice

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the M.2 SSD and provides a visual representation of the installation procedure.
Steps
1. Align the keyboard lattice to its position on the keyboard.
2. Press the edges on the keyboard lattice until it clicks into place.
Next steps
1. Install the base cover.
2. Install the SD card.
3. Follow the procedure in

Tastatur

Removing the keyboard

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the keyboard lattice.
38 Ausbau und Wiedereinbau
after working inside your computer.
before working inside your computer.