Tastaturgitter; Removing The Keyboard Lattice - Dell Precision 7550 Serviceanleitung

2. Connect the antenna cables to the connectors on the WWAN card.
3. Place the WWAN card bracket above the WWAN card to secure the antenna cables.
4. Tighten the (M2x3) screw to secure the WWAN card bracket to the system board.
Next steps
1. Install the base cover.
2. Install the SD card.
3. Follow the procedure in

Tastaturgitter

Removing the keyboard lattice

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
About this task
The figure indicates the location of the keyboard lattice and provides a visual representation of the removal procedure.
Steps
1. Using a plastic scribe, pry the top edge of the keyboard lattice starting from the recess points and working your way around the sides
and bottom edge.
2. Remove the keyboard lattice from the keyboard.
after working inside your computer.
before working inside your computer.
Ausbau und Wiedereinbau 37