Netzschalterbaugruppe Mit Fingerabdruckleser; Removing The Power Button Assembly With Fingerprint Reader - Dell Precision 7550 Serviceanleitung

Steps
1. Place the power button into its slot on the computer.
2. Replace the two (M2x3) screws to secure the power button in place.
Next steps
1. Install the power button
2. Install the heat-sink assembly.
3. Install the battery.
4. Install the base cover.
5. Install the SD card.
6. Follow the procedure in

Netzschalterbaugruppe mit Fingerabdruckleser

Removing the power button assembly with fingerprint
reader
Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the heat-sink assembly.
6. Remove the power button board assembly with fingerprint
About this task
The figure indicates the location of the power button and provides a visual representation of the removal procedure.
58 Ausbau und Wiedereinbau
board.
after working inside your computer.
before working inside your computer.
reader.