Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Initial use
Take the product out of the package and remove all the packaging material. Open
the battery compartment of the outdoor sensor and insert two 1.5V AAA batter-
ies. Then open the battery compartment on the back of the main unit and insert
three 1.5V AAA batteries. Alternatively, you can use the supplied DC coaxial plug
connection cable for operation. Connect the cable with a 5V USB port (for example,
the charger of a smart phone) and connect the coaxial plug with the port on the
main unit.
The weather station should then establish a connection with the outdoor sensor.
For this purpose, press and hold the "Channel" button until you hear a beep and
the following symbol is shown in the display:
es are with each other's range. The outdoor temperature and humidity are then
displayed in the "Outdoor temperature display" of the main unit. If the main unit
cannot establish a connection with the outdoor sensor within 5 minutes, then it
stops searching. The connection icon stops glowing and the temperature display
shows "-._°C" and "--%" on the display.
In most cases, the connection cannot be established due to specific factors such
as reinforced walls or too great a distance between the sensor and the main unit.
In this case, position the sensor and the main unit closer to each other. To restart
scanning, press and hold the "Channel" button on the front of the main unit for
about 3 seconds until the connection symbol appears in the display.
7. Display
Time display:
English
. Make sure that both the devic-
The time can be displayed in a 12-hour
or 24-hour format.
19
Werbung
