EuroLite LED KLS-400 Schnellstart Seite 2

For operation with a controller with DMX512 protocol, the light set is
equipped with 15 control channels.
Setting the DMX starting address and selecting the DMX operating
mode
1. To be able to operate the light set with a DMX controller, the DMX
starting address must be set for the first DMX channel. For this press
the button MENU so many times until
display. Then use the buttons UP and DOWN to set the address.
Note: The starting address depends upon which DMX controller is
being used. Please refer to its user manual.
2. To switch to the DMX operating mode, press the button MENU so
many times until the display indicates
the button UP. The display will indicate
the light set can be operated with the DMX controller.
DMX protocol
Channel 1, Preset programs, automatic mode, sound control
DMX value
000 – 009
010 – 029
030 – 049
050 – 069
070 – 089
090 – 109
110 – 129
130 – 149
150 – 169
170 – 189
190 – 209
210 – 229
230 – 249
250 – 255
Channel 2, Master control
DMX value
000 – 255
Channel 3, Strobe control
DMX value
000 – 009
010 – 255
Channel 4, Spot 1: Brightness red or running speed
DMX value
000 – 255
If channel 1 is set to a DMX value between 010
program or automatic mode is selected, channel 4 controls the running
speed:
DMX value
000 – 255
Channel 5, Spot 1: Brightness green or fade time
DMX value
000 – 255
If channel 1 is set to a DMX value between 010
program or automatic mode is selected, channel 5 controls the fade
time:
DMX value
000
001 – 255
Channel 6, Spot 1: Brightness blue
DMX value
000 – 255
Downloaded from www.Manualslib.com
Operation via DMX controller
is indicated in the
or
and after a few seconds
Function
Off
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Program 7
Program 8
Program 9
Program 10
Program 11
Automatic mode
Sound control
Function
Dimming from 0 – 100%
Function
Off
Strobe slow ® fast
Function
Dimming from 0 – 100%
–
Function
®
R unning speed slow fast
Function
Dimming from 0 – 100%
–
Function
No function
®
Fade time slow fast
Function
Dimming from 0 – 100%
manuals search engine
Channel 7, Spot 2: Brightness red
DMX value
000 – 255
Channel 8, Spot 2: Brightness green
DMX value
000 – 255
Channel 9, Spot 2: Brightness blue
DMX value
000 – 255
. Then press
Channel 10, Spot 3: Brightness red
DMX value
000 – 255
Channel 11, Spot 3: Brightness green
DMX value
000 – 255
Channel 12, Spot 3: Brightness blue
DMX value
000 – 255
Channel 13, Spot 4: Brightness red
DMX value
000 – 255
Channel 14, Spot 4: Brightness green
DMX value
000 – 255
Channel 15, Spot 4: Brightness blue
DMX value
000 – 255
The control panel DMX LED Operator 4 available as accessory is
optimally adapted to the light set. It has four channels so that all spots of
the light set can be controlled in sync. To control the light set with the
DMX LED Operator 4 adjust the DMX starting address 021.
249, i.e. a preset
249, i.e. a preset
www.eurolite.de
Function
Dimming from 0 – 100%
Function
Dimming from 0 – 100%
Function
Dimming from 0 – 100%
Function
Dimming from 0 – 100%
Function
Dimming from 0 – 100%
Function
Dimming from 0 – 100%
Function
Dimming from 0 – 100%
Function
Dimming from 0 – 100%
Function
Dimming from 0 – 100%
Operation with the DMX LED Operator 4
© Copyright Reproduction prohibited!
Subject to change 17.11.2010 00054466.DOC, Version 2