Abus FU8380 Bedienungsanleitung Seite 19

Training
1.
2. Wireless variation:
3. Make sure that the vibration detector is
Settings
The vibration detector has a variety of
possible settings that are made using the
jumpers.
Downloaded from www.Manualslib.com
Set the wireless alarm centre /
wireless receiver to learning mode.
See the receiver instructions for more
details.
Activate the tamper contact on the
wireless vibration detector to send a
tamper message to the wireless alarm
system.
IR variation:
Point the LED of the vibration detector at
the IR receiver of the wireless extension
(RFX). Trigger a tamper contact on the
detector.
recognised by your wireless alarm
system / wireless receiver, then close
the housing.
manuals search engine
19