Sunshower SOLO Handbuch Seite 4

USE OF THE SUNSHOWER
Pay attention to the following when using the Sunshower:
• Remove all creams, lipstick and other cosmetics of the skin before using
the Sunshower.
• Avoid getting to hot. If necessary increase the distance between yourself
and the Sunshower.
• Do not stare into the infrared lamp.
• Keep to the prescribed distance of at least 25 cm.
• Prevent other people watching into the infrared lamp when using the
Sunshower.
• Do not touch the glass pane during and after a infrared session. The glass
pane can be hot.
• Use the Sunshower Solo not if you are sensitive to infrared light, consult
with your doctor.
INFRARED AND YOUR HEALTH
Sunshower uses IR lamps with a full IR spectrum, but optimum operation is
with short waves. These IR rays have a deep reach, penetrating the skin to a
depth of up to 6 mm. This warms the body optimally and efficiently. Harmful
materials are expelled more quickly, blood vessels expand and the muscles
become more flexible so as to improve performance. These lamps were
designed to focus on the neck, back and shoulders. The lamps reach their
full heat capacity very quickly after being switched on, so no time or energy is
wasted. The maximum length of a session with the IR lamps is 10 minutes, so
the chances of the body overheating are very low. Besides, this is enough time
for you to benefit from the relaxing and restorative effects of infrared during and
after showering.
STARTING A SESSION
• Position yourself approximately at least 45 cm of the Sunshower
• Press 1 second on the START/STOP button, the button will turn white.
• The infrared lamp will turn on for 10 minutes and will automatically turn off.
• When you press the START/STOP button during a session, the session ends
prematurely.
The Sunshower will cool down 5 minutes after each session before you can start
it again. The START/STOP button will flash white while cooling down.
USER MANUAL SOLO | P1328 REV D
START/STOP
4