LASERLUCHS PICO-TRACKER-V1 Kundenhandbuch Seite 22

3.3 Instructi ons for use
• The switching unit has the feature over a handy rotary
switch, which you can also use with gloves.
• The tensioned trigger wires reflect the light impuls
from the Tracker if the user is illuminating it. The
light reflection in the room will show the location of
the trigger wire.
• To get the best visible light impuls please follow the
directi ons below:
1. for multi ple, complete scannings of the to be tested
room it is necessary to use the Tracker in diff erent orienta-
ti ons, to detect all of the trigger wires in all levels. (verti cal,
horizontal, diagonal).
2. Don't hold the Tracker in one line with your eyes. Try to
hold the Tracker as laterally as possible (at least 0,5m).
The refl ex of the trigger wire is opti cal next to the line
and easier to recognize.
3. To get the exact locati on of the trigger wire, please turn
the Laser 180° from left to right, aft er you recognized a
light refl ex in the room. Whenever the line of the laser
light on the complete trigger wire, the exact positi on in
the room is visible and the wire „blinks".
• Soiled or fogged opti cs can be cleaned with a microfi ber
cloth or a commercial spectacle cloth.