LASERLUCHS PICO-TRACKER-V1 Kundenhandbuch Seite 21

3.1 Illustrati on
3.2 Commissioning
Insert batt ery
1. Unscrew the switching unit
type CR123A as shown in the illustrati on above. Note: The
positi ve pole of the batt ery
switch .
1
2. Screw the switching unit
Operati on
1. To switch the Tracker on and off , please turn the rotary switch
either way
1
2. You can see the functi onal status at the mark
on the rotary switch. To get the exact service operati on
please read chapter 2.1.
2
back in.
1
.
. Insert the two batt eries
1
has to point to the rotary
2
1
2