CareFusion PrinterNOx Gebrauchsanweisung Seite 26

For NO , the valid range of entry is zero to 19
2
When the required alarms have been set, then selecting option 4 will
return to the main menu.
4. Report to printer (RS232)
The last 24 hours of measurements are stored in battery backed
memory and may be either printed or directed to the RS232 port at
the rear of the instrument. The choice of recovery method depends
upon whether the printer or RS232 port is currently active (see
Setup).
If the RS232 port is active then the data, in ASCII format, may be
uploaded to a PC running standard communication software. A
serial cable, Cat No 36-CAB1108, is available from CareFusion.
Note: Please ensure that all PC's and peripheral equipment comply
to EN60950 'Safety of Information Technology Equipment' and keep
them out of reach of the patient when connected to the PrinterNOx.
5. Status
This option allows the current configuration and sensor information
to be displayed.
24