Atlantic Steatite Cube WI-FI VM serie Handbuch Seite 9

EN
Installation manual: Fitting the water heater
4. Control interface (HMI)
Power supply indicator
Hot water available
and heating indicators
Manual mode
Unoccupied
mode (frost protection)
PLEASE NOTE: The HMI can be switched off by simultaneously pressing the
3 seconds. The operation may be cancelled by repeating the same procedure.
Indicators
Pairing button
indicator status
On Equipment is powered on.
Operating fault.
Regular pulses
Refer to the "Troubleshooting" section.
On Manual mode selected:
The + and - keys are used to set the required quantity of hot water.
On Unoccupied mode activated: The water heater is frost-protected
(7 °C). The BOOST function is deactivated.
On The BOOST function is activated by a quick press:
This accelerates the production of hot water when needed
on 25/40/65 and 80 L products.
This increases the production of hot water when needed
on 100 and 120 L products.
BOOST mode is automatically deactivated once the MAX
temperature has been reached. It can also be deactivated
manually with a quick press, which switches the water heater
back to NORMAL mode.
On ECO+ mode activated; the water heater starts reading
consumption to adapt to the needs of the user and ensure
energy savings, whilst guaranteeing comfort levels.
On Displays the amount of hot water available.
Flashing Shower being prepared.
On Paired water heater connected.
Flashing Water heater pairing in progress.
BOOST button
Setpoint adjustment
in manual mode
ECO+ mode
and keys for
Meaning
7