Cleaning And Maintenance; Technical Specifications - HQ Power VDL800SMT2 Bedienungsanleitung

• Press the TIMER ON/OFF button on the remote; the LED above the button should light, indicating activation of
the function.
• You may now set the INTERVAL and DURATION adjustment knobs to the desired position.
Notes: INTERVAL: time between bursts of fog.
DURATION: time that the fog machine will run during the burst.
1. interval adjustment
2. duration adjustment
3. timer LED
4. manual momentary LED
5. manual/power LED
6. manual control momentary button
7. timer latching button
8. continuous latching button
You can also make the machine burst fog by holding the FOG button at the back of the machine pressed.

6. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections...
3. Mechanically moving parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts, apart from the fuse (see "4. Installation").
8. Contact your dealer for spare parts if necessary.
9. Clean the heating element every 30 hours of use with a special cleaning liquid available from your dealer (order
code VDLCL). Fill the tank with 1/3 of the bottle of cleaning liquid and let the machine run for a while. When the
device is cleaned, remove the remaining cleaning liquid and rinse the tank thoroughly with distilled water. Never
use regular water for cleaning or rinsing!
10. Clean the device every 20 hours of use.

7. Technical Specifications

Power supply
Power consumption
Fuse
Smoke output
Warm-up time
Smoke liquid consumption
Tank capacity
Dimensions
Total Weight
Max. Ambient Temperature
Max. Housing Temperature
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of
damage or injury resulted from (incorrect) use of this device. For more info concerning this product, please
visit our website www.hqpower.com. The information in this manual is subject to change without prior
notice.
VDL800SMT2_v5
max. 230VAC/50Hz
max. 800W
F 5A, 250VAC (5 x 20mm) (order code FF5N)
100m³/min
approx. 4 minutes
approx. 25ml/min
0,75 litres
340 x 190 x 190mm
3kg
45°C
130°C
4 VELLEMAN