Dell Latitude X200 Systeminformationshandbuch Seite 26

24
D e l l™ L a t it u d e™ X 20 0 S y s t e m I n f o r ma ti o n G u i d e
Press and select Yes to save your changes, exit the system setup
7
program, and restart the computer to boot from the CD.
The computer starts and automatically begins to run the Dell
Diagnostics.
The Dell logo screen appears, followed by a message telling you that
the diagnostics is loading. After the diagnostics loads, the Diagnostics
Menu appears.
To select an option from this menu, highlight the option and press
, or press the key that corresponds to the highlighted letter
in the option you choose.
When you have completed running diagnostics, remove the Drivers
8
and Utilities CD.
When the computer restarts, press
9
screen appears, and before the Microsoft Windows logo screen
appears.
In the system setup program, press the right arrow key to move to the
10
Boot screen.
Reset the first device in the boot sequence list to the device noted in
11
step 5.
Press and select Yes to save your changes, exit the system setup
12
program, and restart Microsoft Windows.
as soon as the Dell logo