Fagor 1FFC-41 Bedienungsanleitung Seite 63

CHANGING THE DIRECTION OF DOOR OPENING
Remove the middle hinge by removing the
protective plate which hides the screws, and after
removing them, grasp the lower door with both
hands and remove it from the refrigerator.
Remove the lower skirting as shown in the diagram.
Then remove the left part of the skirting as shown to
locate the lower hinge as shown in the diagram.
Remove the lower hinge by removing the 3
retaining screws (A). Remove the spindle (B) from
the right-hand side position and insert it on the left
hinge.
Insert the lower hinge on the left after first
removing the two screws (C).
Insert the lower hinge on the left after first
removing the two screws (C).
Replace the lower skirting. Locate the lower door
spindle and placing it on the lower hinge spindle.
Remove the cover of the left-hand side lower door
spindle and place it on the right-hand side
(panellable models do not have this cover).
Insert the middle hinge on the left-hand side spindle of
the lower door and screw it to the fridge, after first
removing the protection covering the holes. Locate the
upper part by placing it on the spindle of the middle
hinge. Then, replace the protection plate that conceals
the fixing screws.
Hold the top with both hands and fit it on to the
middle hinge shaft, then fit the top hinge shaft into
its housing.
Fit the electronic card in position and switch on the
power supply.
Insert the door control panel housing by pressing
on the door support until the attachment lugs fit into
place.
13