off again. Check again that all the screws,
bolts and fixings are firmly seated.
Operation
Place the workpiece on to the base plate
against the rear stop
vice
.
41
Note: Ensure that the workpiece lies against
the base plate
.
32
CAUTION! DANGER OF INJURY! Ensure
that the length of the workpiece is at least half
the length of the stop
piece may become loose and slide out.
Set the vice
so that the workpiece lines up
41
with the centre of the cutting disc.
Now switch on the angle grinder and press it
down on to the workpiece.
Avoid any backwards movement
and apply even pressure on the
workpiece.
Cleaning and care
Use a slightly moist, flufffree cloth when you
are cleaning or polishing the product.
Disposal
The packaging is made entirely of recycla
ble materials, which you may dispose of
at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your wornout
product.
WARRANTY
The device has been manufactured to strict quality
guidelines and meticulously examined before delivery.
In the event of product defects you have legal rights
against the retailer of this product. Your legal rights are
not limited in any way by our warranty detailed below.
The warranty for this device is 3 years from the date of
purchase. Should this device show any fault in materi
32
and secure it with the
27
, otherwise the work
27
als or manufacture within 3 years from the date of pur
chase, we will repair or replace it – at our choice –
free of charge to you.
The warranty period begins on the date of purchase.
Please keep the original sales receipt in a safe loca
tion. This document is required as your proof of pur
chase. This warranty becomes void if the device has
been damaged or improperly used or maintained.
The warranty applies to faults in material or manufac
ture. This warranty does not cover product parts sub
ject to normal wear, thus possibly considered consuma
bles (e.g. batteries) or for damage to fragile parts, e.g.
switches, rechargeable batteries or glass parts.
GB/MT
31