Connecting A Dvd Recorder Or Video Recorder And Sat Receiver; Connecting A Camcorder; Device With Hdmi Or Dvi Output - Medion MD30357 Bedienungsanleitung

Connecting a DVD recorder or video recorder and SAT
receiver
If you want to connect a DVD recorder or video recorder and a SAT receiver at the same time, you can do so as
follows:
Connect the receiver as described above.
Now connect the receiver using a SCART cable plugged into the SCART output on the DVD recorder and
the SCART input on the receiver.
Connect an antenna cable between the antenna socket on the LCD TV and the antenna output on the
recorder.
Connect an additional antenna cable between the antenna input on the DVD recorder and the antenna
output on the SAT receiver.
Connect the SAT receiver to the LNB on the parabolic antenna.

Connecting a camcorder

With a stereo cinch cable and a video cinch or S-video cable
To play back images and sound on your LCD TV connect the camcorder to the AUDIO-IN sockets and
VIDEO-IN sockets on the LCD TV.
As an alternative to the video cinch cable (yellow) you can also connect an S-video cable between the S-
video input on the LCD TV and the S-video output on the camcorder.
Note
Do not use the S-video and video inputs at the same time to avoid interfering with the image.

Device with HDMI or DVI output

HDMI ("High Definition Multimedia Interface") in consumer electronics is the only interface that transmits audio
and video data simultaneously. It handles all image and sound formats currently in use, including HDTV (High
Definition TV), which means it can also display resolutions of 1080i without any loss in quality.
Many consumer electronic devices, e.g. DVD players, are now equipped with HDMI outputs.
Connecting an external device with a HDMI output
Switch both devices off.
Connect a HDMI cable (monitor cable; not supplied) to the HDMI input of the LCD TV and to the HDMI
output of the external device.
Switch the LCD TV on when the HDMI device is connected.
Switch on the external HDMI playback device.
Connecting an external device with a DVI output
If the external device has a DVI output then you can also connect it to the HDMI input (HDMI is downwards
compatible to DVI – "Digital Visual Interface"). For this you will need a HDMI-DVI adapter. The DVI output does
not transmit sound so you will have to connect an audio cable in addition.
Connect a stereo cinch cable with 3.5-mm jacks to the VGA AUDIO-IN socket to transmit sound.
EN
31